Stretching the Boundaries of Large PET Containers
NPE2024: Cypet shows off new capabilities for its ISBM machines.
Cypet now can mold four PET 5-gallon returnable water bottles in four cavities using one extruder — said to be a first. Source: Cypet Technologies
Cypet Technologies, a Cyprus-based builder of one-stage injection stretch-blow molding (ISBM) machines, is showing the latest achievements in large PET products made on its equipment. These include new sizes and styles of handled and stackable PET containers, including novel interlocking products:
- A novel PET agricultural application in Mexico is a 434-mm-long tube, 40-mm wide, with a pointed tip in the unstretched base, which enables it to be driven into the soil to serve as a support for growing crops. Molded in 16 cavities, it requires tight tolerances for the base to interlock with the neck of an identical part, so that five parts can be connected end to end to make structure that extends 2 meters above the ground.
- Cypet’s first 60-L stackable industrial container with twin integral handles is a new entry in a market where the typical size for such a container is 20 L, according to Sideris.
- Cypet is highlighting three other containers that are not “firsts” in the industry, but have not been molded before on its machines: A PET jar with a weight-saving blown neck, made by molding a dome above the neck and then removing it with a spin trimmer; a 20 L container for edible oil and chemicals with four-high stackability (versus three-high previously); and a family of PET jars with a deep groove grip, from 1.3 L to 2.2 L.
Related Content
-
Young Stretch-Film Processor Bets on Nanolayers
Going up against companies with as much as double its capacity, young stretch-film processor Zummit believes that new technology — notably 59-nanolayer films — will give it a competitive edge.
-
Best Methods of Molding Undercuts
Producing plastics parts with undercuts presents distinct challenges for molders.
-
How to Optimize Injection Molding of PHA and PHA/PLA Blends
Here are processing guidelines aimed at both getting the PHA resin into the process without degrading it, and reducing residence time at melt temperatures.